Home › Praga Hardscape

Limestone pool deck and coping, Dallas–Fort Worth

Quarry · factory · Fort Worth yard

Praga Hardscape

Pavers & tilesPool copingSteps & capsCladdingOutdoor kitchensSolid pieces

We are not a distributor. Praga quarries the stone in Mexico, cuts it at its own factory and stocks it in Fort Worth — so every format on this page can be made in any of our stones, in the size, thickness and finish your project needs.

In the yard todayEleven stones as pavers, coping and tiles

To orderAny stone in the Slab Gallery, any format, cut to drawing

StonesLimestone · Travertine · Marble

Lead timeStock: same week · Custom: quoted per piece

Request a quote Send a drawing

What we make

Eight families. The first four are the everyday hardscape line; the last four are where owning the quarry and the factory makes the difference.

01 — 08

Pavers & tiles

French pattern, 6×12 to 24×24 and XL formats, 1¼″ and 2″ thick. Interior tiles from the same block.

Formats

Pool coping

Bullnose, double bullnose, eased, chiseled and drop-face; straight, radius and mitred corners cut to template.

Profiles

Steps, treads & risers

Bullnose treads to 8 ft, solid step blocks, risers and stair cladding in one stone.

Formats

Wall, column & pier caps

Wall caps with drip edge, column caps to 36″, pyramid pier caps, sills and lintels.

Formats

Cladding & veneer

Cut-to-size facade panels, split-face and ledger panels, corners and ashlar — the facades on our Projects page.

Facades

Outdoor kitchens & BBQ

Countertops and bar tops in 3 cm, grill-island cladding, backsplashes, hoods and sinks in the same stone as the deck.

Outdoor kitchens

Fireplaces, fountains & solid pieces

Fire pits and fire bowls, fountains and water features, benches, planters, balustrades, columns and mantels.

Solid pieces

Custom & architectural

Moldings, cornices, door and window surrounds, monoliths, address stones — anything that can be made in stone, from your drawing.

Send a drawing

Pavers & tiles · formats

The formats US pool builders and landscapers specify, cut at our factory. Anything not on the list is a custom cut, not a special order.

Format	Inches	Thickness	Typical use
French / Versailles pattern	8×8 · 8×16 · 16×16 · 16×244 pieces, 8 sq ft per set	1¼″ (3 cm) · 2″ (5 cm)	Pool decks, patios
Plank	6×12 · 6×24 · 8×24	1¼″ · 2″	Running bond, herringbone
Square	12×12 · 16×16 · 24×24	1¼″ · 2″	Stack bond, driveways in 2″
Rectangle	12×24 · 16×24 · 18×36	1¼″ · 2″	Patios, walkways
XL	24×36 · 24×48 · 36×36	2″ · 1¼″ on slab	Modern decks, stepping pads on lawn
Interior tile	12×24 · 18×18 · 24×24from the same block as the deck	⅜″ · ½″ (1–1.2 cm)	Indoor–outdoor continuity

Also available: cobbles 4×4 and 6×6 in 2″, stepping stones, and any custom size or thickness up to 4″. Pallet coverage confirmed per material.

Finishes

Real samples from our factory. Every finish can be cut on any of our stones; ask for a sample in your material.

All finishes & textures

Texture library · every one of these can be made on any of our stones (shown on Crema Paloma)

Signature texture

Combed

Fine parallel grooves cut across the face — 2.5, 5 or 10 mm. Our most requested texture for walls, facades and feature panels: it reads as fabric from a distance and as stone up close. Cut on any of our stones, on tiles, panels or full slabs.

Ask for a combed sample

Large-format limestone pavers around a pool — Large-format pavers, pool deck

Limestone patio and pool deck — Patio and pool deck, one stone

Marble pavers with fire pit and steps — Marble deck, fire pit and radius steps

Pool coping

Six profiles in every stone, straight or radius. Corners mitred at the factory, not on site. Diagrams, specs and a perimeter calculator on the coping page.

Single bullnose

Double bullnose

Eased edge

Chiseled / rock face

Drop face (2½″ – 4″)

Radius, to template

Piece	Inches	Thickness
Coping	12×24 · 16×24 · 12×48bullnose, eased or chiseled on one long side	1¼″ · 2″ · 3″
Double bullnose	12×18 · 12×24both long sides finished — raised beams, spa walls	2″
Corners	Inside and outside 90°, mitredcut at the factory to your radius or angle	to match
Spillway / weir stones	12×24 · 24×24, notched	2″ · 3″

Steps, treads & risers 03

Piece	Inches	Thickness
Treads	12×36 · 12×48 · 14×72 · 16×96bullnose or eased on one or three sides	2″ · 3″
Solid step blocks	6″ and 7″ rise · 14″–16″ run · to 8 ft long	solid
Risers & stair cladding	6×24 · 7×24 · cut to size	¾″ · 1¼″

Wall, column & pier caps 04

Piece	Inches	Thickness
Wall caps	12×24 · 14×24 · 16×24drip edge underneath on request	2″ · 3″
Column caps	18×18 · 24×24 · 30×30 · 36×36flat, eased or bullnose all sides	2″ · 3″
Pier caps, pyramid	24×24 · 30×30, solid	4″ – 6″
Sills & lintels	cut to opening, sloped sill on request	2″ · 3″ · 4″

Pool and raised spa with stone coping — Pool and raised spa, bullnose coping

Limestone exterior steps — Exterior steps, solid treads

Floating marble stair treads — Floating treads, interior — same factory, same stone

Spa with solid stone cap — Raised spa: solid cap and coping in one piece

Coping, steps and caps in our stone

Travertine veneer, close-up — Veneer, close-up

Cladding & veneer

The facades on our Projects page are cut-to-size panels from the same blocks as the pavers — one stone from the driveway to the roofline.

Cut-to-size panels · ¾″ (2 cm) and 1¼″, honed, brushed or sandblasted, to the elevation drawing
Split-face panels · 6×24 and 6×18 corners, dry-stack look
Ledger / stacked panels · 6×24, honed or split
Ashlar & rubble · sawn-back, random heights, thin veneer 1″–1½″
Mosaics · 1×2 and 2×4 split face on mesh
Copings, sills and jambs to finish every opening in the same stone

See facades in Projects Send an elevation

Outdoor kitchens & BBQ islands

The countertop, the island and the deck in one stone. Cut at the factory from your grill and appliance cut-out sheet, delivered ready to set.

Countertops & bar tops · 3 cm (1¼″) honed or brushed, eased or bullnose edge, mitred waterfall ends
Cut-outs · grill, side burner, sink, fridge and access doors from the manufacturer's template
Island cladding · cut-to-size panels or split face, corners mitred
Backsplash & hood · matching panels, or a solid carved hood
Sinks & troughs · solid, from one block
Pizza-oven surrounds, bar fronts, seating ledges

Quote an outdoor kitchen

Solid stone sinks — Solid sinks, from one block

Fireplaces, fountains & solid pieces

Pieces a distributor cannot stock: carved and milled from the block at our factory, in the same stone as everything else on the site.

Fireplaces & mantels

Outdoor and indoor surrounds, hearths, mantel shelves, chimney caps. Traditional carved or clean modern lines.

Fire pits & fire bowls

Round and square fire pits with cap and cladding; solid fire bowls turned from one block, 30″ to 48″.

Fountains & water features

Wall fountains, tiered fountains, basins, spillways and scuppers, pool sheer-descent surrounds.

Benches & tables

Solid garden benches, table tops and pedestals, pool-side loungers in stone.

Planters & bowls

Cubes, troughs, tapered and round planters, drainage drilled; urns and bowls on pedestals.

Columns, balustrades & posts

Turned columns and capitals, balusters and rails, gate and lamp posts, address stones and signage.

Stone fire pit on a paver deck — Fire pit and deck

Rock-face solid counter — Rock-face counter, one block

From the factory: benches, sinks, moldings, balusters, planters, fire bowls, pedestal basins

A hardscape distributor

Imports pallets — the sizes on the price list, from someone else's quarry
Stock colors only — what is in the warehouse this season
One thickness per format, standard edges
Custom = special order from overseas, months out
No solid pieces, or catalog cast stone

Praga — quarry, factory and yard

Our own quarries in Mexico, our own factory, our own yard in Fort Worth
Any of our stones, in any format on this page — the same stone across deck, coping, facade and kitchen
Any thickness, any edge, cut to your drawing, radius to template
Custom is normal: container-direct from the factory, quoted per piece with a lead time
Solid and carved pieces from the block: fireplaces, fountains, benches, fire bowls

Send a drawing